|
OTHER APPLICATION IC-Remote Controller
|
|
|
|
Part No.
|
Function
|
Features
|
VCC(V)
|
Package
|
|
RCR6C
|
Remote Controller for Toy Car
|
Decoder for Remote Controller with Seven Functions
(Forward/Backward/Turbo/Right-turn/Left Turn/Two)
* Operating voltage range: 2.4V~4.5V
* RCR6C-A built-in 3.6V ZENER
RCR6C-B built-in 4.2V ZENER
RCR6C-C built-in 5.0V ZENER
* Few external components needed
* 7-function remote controller controlling Forward/ Backward/ Turbo/
Right-turn/ Left turn/ two function keys
* Complement to UTC RCT6.
|
2.4~ 4.5
|
DIP-18 DIP-20
|
|
RCT6
|
Remote Controller for Toy Car
|
Remote Controller with Seven Functions
(Forward/Backward/Turbo/Right-turn/Left Turn/Two)
* Operating voltage range: 2.0V ~ 5.0V
* RCT6-A built-in 3.6V ZENER
RCT6-B built-in 4.2V ZENER
RCT6-C built-in 5.0V ZENER
* Very low Stand-by current
* Few external components needed
* 7-function remote controller controlling Forward/Backward/Turbo/
Right-turn/Left turn/two function keys
|
2.0 ~ 5.0
|
DIP-16
|
|
RCT2E
|
Remote Controller for Toy Car
|
Encoder for Remote Controller with Five Functions
(Forward/Backward/Turbo/Right/Left)
* Wide and Low operating voltage range: 1.8V ~ 5.0V
* 5-function remote controller controlling forward/ backward/ turbo/
right/ left.
* Provide two transmissive interface (RF and IR) for different
application.
* Auto Power-OFF function
* Few external components needed and Oscillator with an external
resistor.
* Low Standby current and low operating current.
* Long distance Remote Control to 100M in UTC RCT2E and UTC
RCR2C pairing.
* Typical oscillator frequency:
RF: 116 ~ 140KHz.
IR: 114KHz (Carrier Frequency: 57KHz).
IR: 76KHz (Carrier Frequency: 38KHz).
|
1.8 ~ 5.0
|
DIP-14 SOP-8
|
|
RCR2C
|
Remote Controller for Toy Car
|
Decoder for Remote Controller with Five Functions
(Forward/Backward/Turbo/Right/Left)
* Wide and Low operating voltage range:
1.8V ~ 5.0V(No DC-DC)
1.0V ~ 5.0V(Use DC-DC)
* 5-function output pins for control forward/ backward/ turbo/
right/ left.
* Provide two transmissive interface (RF and IR) for different
application.
* Selectable Output Signal Format through MOD pin
* Internal, Selectable DC-DC converter which need few
external components
* Provide two high effective amplifiers and enhancive signal
enput (SI) recognition capacity for very weak signal for
increasing remote control distance.
* Few external components needed and Oscillator with
an external resistor.
* Low operating current.
* Long distance Remote Control to 100M in UTC
RCT2E and UTC RCR2C pairing.
* Typical oscillator frequency:
RF: 116~140KHz.
IR: 114KHz(Carrier Frequency: 57KHz).
IR: 76KHz(Carrier Frequency: 38KHz).
|
1.8 ~ 5.0
|
DIP-16 SSOP-10
|
|
RCR2E
|
Remote Controller for Toy Car
|
Decoder for Remote Controller with Five Functions
(Forward/Backward/Turbo/Right/Left)
* The UTC RCR2E works as decoder
* RCR2E-A have not ZENER
RCR2E-B built-in 3.6V ZENER
* Five Pins for five control functions
* Operating power-supply voltage:
SOP-16: 2.0V ~ 5.0V, DIP-16: 2.5V ~ 5.0V
* Auto-power-off if no press on any button in 8s or
continuously press on any button over 4 minutes
* Manual-power-off with OFF button
* On-chip oscillator with an external resistor
* On-chip reversing amplifiers
* Low operating current
|
2.0 ~ 5.0
|
DIP-16 SOP-16
|
|
RCR02*
|
Remote Controller for Toy Car
|
Decoder For Remote Controller with Five Functions
*Five output pins for control functions
*Operating power-supply voltage range: 2.5 to 5.0V
*On-chip reversing amplifiers
*On-chip oscillator with an external resistor
*Low operating current
*Few external components needed
|
2.5 ~ 5.0
|
DIP-16 SOP-16
|
|
RCT02*
|
Remote Controller for Toy Car
|
Encoder For Remote Controller with Five Functions
*Five input pins used for five control buttons
*Operating power-supply voltage range: 2.5 ~ 5.0V
*Auto-power-off if no press on any button in 4 minutes or
continuously press on any button over 4 minutes
*Manual-power-on/off with ON/OFF button
*One output pin used for external power control
*Press on any button as wake up
*On-chip oscillator with an external resistor
*Low operating current
*Few external components needed
|
2.5 ~ 5.0
|
DIP-14 SOP-14
|
|
RCR5
|
Remote Controller for Toy Car
|
Remote Controller with Nine Functions
* Operating voltage range: 2.4V~4.0V
* Built-in 4.2V zener
* Few external components needed
* 9-function remote controller controlling Forward/ Backward/ Turbo/
Right-turn/ Left turn/ four function keys
* Complement to UTC RCT5.
|
2.4 ~ 4.0
|
DIP-22
|
|
UT912D
|
Decoder or Encoder IC
|
Decoders for Remote Controller
* Pair with UTC UT912E
* Operating voltage: 2.4V ~ 12V
* Low power and high noise immunity CMOS technology
* Low standby current
* Built-in oscillator needs only 5% resistor
* Binary address setting
* Received codes are checked 3 times
* Capable of decoding 12 bits of information
* Address/Data number combination: 8 address bits and 4 data
bits
* Vaild transmission indicator
* Minimal external components
|
2.4 ~ 12.0
|
DIP-18 SOP-20
|
|
UT912E
|
Decoder or Encoder IC
|
Encoders for Remote Controller
* Operating voltage: 2.4V ~ 12V
* Low power and high noise immunity CMOS technology
* Low standby current (0.1μA (typ.) at VDD=5V)
* Minimum transmission word (Four words)
* Built-in oscillator needs only 5% resistor
* Data code has positive polarity
* Minimal external components
|
2.4 ~ 12.0
|
DIP-14 DIP-18
SOP-16 SOP-20
|
|
M3000
|
Decoder or Encoder IC
|
PIR Infrared Remote Control Circuit
* Low Power CMOS Technology
* CMOS High Input Impedance Operational Amplifiers
* Bi-Directional Level Detector / Excellent noise Immunity
* Built-in Power up Disable & Output Pulse Control Logic
* Dual Mode : Retriggerable & Non-Retriggerable
|
3.0 ~ 5.0
|
SOP-16
|
|
UT8803
|
Decoder or Encoder IC
|
PIR Infra-red Remote Control Circuit
* High Noise Immunity.
* Output drivable RELAY or TRIAC.
* Contain two OP amps, gain adjustable.
* Control time adjustable.
* Steady voltage inside output 3.1 V to drive the PIR directly.
* Integrate zero cross detect, the AC power supply triggers
synchronously, lowering the power supply pollution.
|
4.5 ~ 5.5
|
DIP-16
|
|
RBA5104
|
Remote Fan Control IC
|
Fan Remote Control Encoder
* Wide operation voltage: VCC=2.2~4.0V
* Noise immunity technique
* 2 bits custom code
* 8 input channels maximum
* Uses 455kHz crystal oscillator
* Key-in oscillation, reduce static current dissipation.
* 38kHz carrier transmits output.
* LED indicates work state
|
2.2 ~ 4.0
|
DIP-16
|
|
RBA8206
|
Remote Fan Control IC
|
Remote Fan Control IC
* Low power consumption
* Three speed modes: Strong, Middle and Low
* Three operation modes: Ordinary, Nature and Rhythm Sleep
* Work mode memory
* Middle wind start-up
* Buzzer indicator function operation
* 2-bits consumer code
* Uses 455kHz crystal oscillator
|
3.0 ~ 6.0
|
DIP-20
|